Configuring ZOLL emsCharts Integration with ZOLL Cloud ECG

IMPORTANT! You must have the following before proceeding:

• CaseReview or Case Transfer - contact your sales representative to learn more.

  Note: Case Transfer is free of charge but must be enabled for your ZOLL Online account. Please email supportdata@zoll.com for access to Case Transfer.

• ZOLL emsCharts 'EKG Import for Web' module enabled - contact your sales representative to learn more.

• Software administrator access for both ZOLL emsCharts and CaseReview. If you don't have administrator access, contact your software administrator for assistance.

These instructions are for integrating ZOLL emsCharts with CaseReview. This integration is also referred to as ZOLL Cloud ECG import.

1. Before proceeding with your ZOLL emsCharts ECG configurations, you must first setup your data access key (DAK) to upload to the cloud. Once finished, come back to this page and continue with steps 2-4.

   

2. Configure three code tables in ZOLL emsCharts.

   Web ECG Server Setup

   Use Web ECG Server Setup to enter the Data Access Key information from CaseReview that you recorded in step 1.

   

   • Vendor: Select ZOLL.
   • Data Access Key (Username): Enter the DAK's access key.

     

   • Password: Enter the password you configured for this DAK in CaseReview.

     

   • URL (Corsium): Leave blank. This is only used for Philips ECG integration. It is not for ZOLL emsCharts CaseReview integration.
   • Vendor Account ID: Enter your ZOLL Online account number. You can find it by logging into ZOLL Online and hovering over the Company icon on the navigation bar.

     

   • Authentication Type: Select 'Data Access Key'.
   • Last Poll Date: The account’s last verified poll date.
   • Disabled: Select No to enable the configuration, Yes to disable it.
   • Click Save.
   Web ECG Configuration

   Use Web ECG Configuration to setup your default ECG device manufacturer and vitals and events import and print options.

   

   • Default ECG Vendor: Select ZOLL.
   • Default ECG Image Attachment Category: Select EKG.
   • Click ZOLL ECG Import Options: Choose which vitals and events to import, which events to display on printed reports, and ECG image options. Scroll down to the bottom and click Save after making your selections.
   Web ECG Monitor Registration

   Use Web ECG Monitor Registration to setup your ZOLL monitors.

   

   • ID: Enter the device’s ID number.
   • Serial#: Enter the device’s serial number.
   • Name: Enter an identifying name for this device.
   • Vendor: Select ZOLL.
   • Click Save.
   • Repeat these steps until all ZOLL monitors are configured and appear in the list.

   Note: The following video covers steps 2 and 3.

   

3. Configure your ZOLL emsCharts service Chart tab to turn on the ability for your users to import cases on Page 8 of their charts.

   1. Under your service, click Configuration, then the Chart tab.

   2. Scroll down to find the 'Page 8' section and set ZOLL Online CaseReview to Yes.

      

   3. Click Save.

4. Configure your ZOLL monitors to push cases to CaseReview.

   Note: Learn about all three options for uploading to CaseReview.

 

Next, learn how to:

• Import cases into Web and view them in CaseReview.

• Import cases into ZOLL emsCharts for Windows version 4.1.0 and higher.